What are the basic specifications of all resin carbon strips?

The basic specifications of all resin carbon strips are varied to meet the needs of different industries and application scenarios. Here are some common all-resin carbon strip specifications:

1. Width specification

The width of the full resin carbon strip is one of its basic specifications, common widths are 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, etc., and can even be customized according to specific needs. The choice of width usually depends on the size of the printed label and the compatibility of the printer.

2. Length specifications

Length is also an important specification for all resin carbon strips. The most common all-resin carbon tape length on the market is 300m, but other length specifications may also be available, such as shorter 70m or longer tape. The choice of length specifications depends on the amount of printing and the frequency of use.

3. Core diameter

The core diameter refers to the inner core diameter of the carbon strip when it is wound, and the common core diameter is 0.5 inch (about 12.5mm) and 1 inch. Different printers may require different diameter cores to ensure the smooth installation and use of carbon strips.

4. Carbon tape roll

Carbon strip winding refers to the winding direction of the carbon strip on the coil core, and there are two common types of internal carbon and external carbon. Inner carbon refers to the carbon layer towards the inside of the core, while outer carbon refers to the carbon layer towards the outside of the core. The choice of carbon tape winding depends on the specific requirements of the printer and the use of carbon tape.

5. Special specifications

In addition to the above basic specifications, the all-resin carbon strip can also be customized according to special needs, such as different colors, different materials, different coatings, etc. These special specifications of all-resin carbon strips can meet the specific needs of specific industries and application scenarios.

Give an example

Width and length combination: such as 110mm300m, 80mm300m, etc., which is a more common specification combination on the market.

Specific application scenarios: In jewelry labels, electronic product identification, etc., where high-quality printing is required, full resin carbon belts with moderate width and long length may be selected to ensure printing effect and service life.

In summary, the basic specifications of the all-resin carbon strip include width, length, core diameter, carbon strip winding, etc., and the specific specifications can be selected or customized according to actual needs. When selecting all-resin carbon tape, it is recommended to consider the compatibility of the printer, printing volume, frequency of use, and the needs of specific application scenarios.