How to properly install and use all resin carbon tape?

To properly install and use all resin carbon tape, follow the following steps and precautions:

First, preparation before installation

1.Confirm ribbon type: Make sure you are buying an all-resin ribbon and check if it is suitable for your printer model.

2.Tools: Prepare all tools required for installing carbon belts, such as carbon belt adapter tubes and empty coil cores.

3.Clean the printer: Before installing the carbon strip, it is recommended to clean the printer's print head and internal space to ensure print quality and extend the life of the device.

Second, installation steps

1.Open the printer cover: Follow the instructions in the printer manual to open the printer cover to reveal the carbon tape mounting area.

2.Install carbon tape adapter tube and carbon tape reel:

Insert a carbon strip adapter tube into the paper core of the carbon strip, ensuring that the adapter tube is oriented correctly.

Clamp the carbon tape roll into the carbon tape supply end to ensure that the carbon tape is smoothly placed on the adapter tube.

3.Install empty coil core: Install empty coil core at the carbon strip recovery end to facilitate the recovery of waste carbon strip during the printing process.

4.Tighten the carbon belt: Rotate the carbon belt turntable at the recycling end of the carbon belt to tighten the carbon belt and ensure the smooth transmission of the carbon belt during the printing process.

5.Fixed print head module: Press down the print head module and ensure that the locking rod locks the print head positioning shaft. At this time, you can hear the sound of "click", indicating that the print head module is fixed.

Third, use precautions

1.Check the indicator: During the printing process, pay attention to the indicator status of the printer, such as "ready", "paper" and "carbon belt" indicators, to determine the operating status of the printer and whether there is an abnormal situation.

2.Adjust the printing pressure: according to the type of printing material and carbon tape, adjust the printing pressure of the printer to ensure the best printing effect.

3.Regular cleaning: Clean the print head and internal space regularly to remove dust and impurities and keep the printer clean and functioning properly.

4.Pay attention to the storage environment: unused all-resin carbon strips should be stored in a dry, cool environment, away from direct sunlight and humidity to ensure that their performance is not affected.

5.Avoid scratching the print head: When installing and using the carbon belt, be careful to avoid scratching the print head with sharp objects to avoid damaging the equipment.

Fourth, common problem handling

1.Carbon belt breakage: If the carbon belt is broken during use, check whether the carbon belt is installed correctly, whether there are impurities stuck in the carbon belt, and reinstall or replace the carbon belt.

2.The printing effect is not good: if the printed label is fuzzy, unclear or has residual shadows, etc., you should check whether the printing pressure is appropriate, whether the carbon belt type matches and whether the printer Settings are correct, and adjust accordingly.

In short, the correct installation and use of all-resin carbon tape requires certain steps and precautions to ensure print quality and equipment life. When problems are encountered in the process of use, they should be checked in time and appropriate measures should be taken.