What are the axial specifications of reinforced mixed carbon ribbon?

According to public information and common industry specifications, the axial specifications of the enhanced hybrid carbon ribbon mainly include the following parameters. Combined with technical documents and supplier data, they are summarized as follows:

1、 Core axis specifications

Inner diameter (core diameter)

Standard size: 1 inch (25.4mm) or 0.5 inch (12.7mm).

Application scenarios:

Large core (1 inch): Suitable for long carbon tapes (usually over 300m), used for industrial grade continuous printing.

Small core (0.5 inches): commonly used for short carbon tapes (70m/90m/110m), suitable for desktop printers or portable devices.

outside   diameter

Dynamic parameters: The outer diameter is determined by the number of carbon ribbon winding layers, and standard products are usually not clearly labeled.

Customization options: The inner/outer carbon winding direction may affect the outer diameter size, while the inner carbon is specially customized (with the core on the inner side).

length

Standard specifications: 90m, 300m, 450m, 600m.

Customization scope: Some suppliers support special lengths such as 70m, 100m, 1000m, etc., and the production cycle needs to be communicated in advance (usually 1-3 days).

2、 Physical characteristics and compatibility

Core material

Paper core: commonly used in ordinary heat transfer carbon belts, with low cost and suitable for one-time use.

Plastic core: TTO (thermal transfer film) carbon tape is a versatile plastic tube core with stronger durability and can be reused.

Checkpoint design

1-inch axis: usually without a bayonet, directly inserted into the printer spool.

0.5 inch axis: Some models come with an open slot design to enhance the stability of the engagement with the printer spool.

Width matching

Standard width: 30mm-110mm (mainstream 50mm/80mm/110mm).

Customization capability: Supports ultra wide sizes such as 220mm/210mm (equipment compatibility needs to be confirmed).

3、 Industry application suggestions

Device adaptation:

Industrial printers such as Zebra and Toshiba TEC are typically compatible with a 1-inch axis.

Desktop printers (such as Jiabo GP) may require a 0.5-inch axis, please check the equipment manual.

Performance Enhancement:

By optimizing the ratio of resin and wax, the enhanced mixed carbon ribbon improves its scratch resistance (suitable for logistics labels and synthetic paper printing).

TTO ribbon supports high-speed printing (up to 40 inches/second) and needs to be matched with a plastic core to withstand high temperatures.

4、 Procurement precautions

Customization cycle: Special specifications (such as 220mm width and 70m length) require 1-3 days for production.

Compatibility testing: Large core carbon tape may increase the burden on the printer spool due to its weight. It is recommended to test it in advance.

Environmental storage: Avoid direct sunlight or humid environments to avoid affecting the adhesion of the carbon ribbon.

If further confirmation is needed on the compatibility parameters of specific brands (such as Ricoh RICOH B110A) or printer models (such as Zebra 888TT), it is recommended to provide the device model for accurate matching.