Before using wax based carbon ribbon, the following preparations need to be made:
1. Check the quality of the carbon ribbon:
Before use, it is necessary to check the appearance and quality of the wax based carbon ribbon. Ensure that the carbon ribbon is not damaged, broken, or expired. Visual inspection can include checking whether the surface of the carbon ribbon is flat, free of impurities or spots, etc.
2. Adjust printer settings:
Adjust the printer settings based on the characteristics of wax based carbon ribbon and printing requirements. This includes setting appropriate printing speed, printing density (also known as printing depth, printing pressure) and other parameters. Proper printer settings can ensure optimal printing results.
3. Install carbon ribbon:
Install the wax based carbon ribbon correctly on the printer. This usually involves opening the top or side cover of the printer, disconnecting the carbon ribbon roll from the hollow core, and slightly winding one end of the carbon ribbon onto the hollow core. Then, insert the ribbon roll into the ribbon supply end of the printer and ensure that the ribbon can smoothly pass through the print head. Finally, insert the empty core into the carbon and bring it back to the receiving end.
4. Clean the print head:
It is very important to clean the print head of the printer before or after installing the ribbon. Gently wipe the print head with a clean cloth or specialized cleaning paper to remove dust, stains, or residual carbon ribbon powder. This helps ensure the clarity and print quality of the print head.
5. Adjust print head pressure:
Adjust the pressure of the print head according to the thickness of the wax based carbon ribbon and the model of the printer. Appropriate pressure can ensure a tight contact between the carbon ribbon and the printing paper, thereby achieving clear printing results. Insufficient pressure may result in unclear printing, while excessive pressure may damage the print head or ribbon.
6. Test printing:
It is essential to conduct one or more tests of printing before officially starting. This can check whether the printer settings are correct, whether the ribbon is installed properly, and whether the print quality meets the requirements. If any problems are found, they can be adjusted and corrected in a timely manner.
In summary, the preparation work before using wax based carbon ribbon includes checking the quality of the ribbon, adjusting printer settings, installing the ribbon, cleaning the print head, adjusting the print head pressure, and conducting test printing. These preparations can ensure the normal use and optimal printing effect of wax based carbon ribbon.