How to solve the problem of paper jam during the printing process of long-lasting three proof thermal paper?

The problem of paper jam in the printing process of long-lasting three proof thermal paper may be caused by various factors. Here are some specific solutions:

1、 Gently remove the paper

If the paper jam is not severe, you can try gently removing the paper stuck inside the printer. During this process, be careful to prevent paper tearing or further damage to the printer.

2、 Check the quality of the paper

The quality of paper is one of the key factors leading to paper jam problems. Although long-lasting three proof thermal paper has waterproof, oil proof, scratch proof and other characteristics, if the paper is too thick or too thin, or does not meet the specifications of the printer, it may cause paper jams. Therefore, it is recommended to use high-quality, long-lasting three proof thermal paper that meets the specifications of the printer.

3、 Adjust the paper guide board

The paper guide board is responsible for guiding the paper into the printer. If not set properly, it may cause the paper path to be incorrect, resulting in paper jams. Therefore, it is necessary to adjust the paper guide plate according to the size of the paper to ensure that its setting matches the paper size.

4、 Pay attention to thermal print heads

The thermal print head is the core component of a printer. If there is a problem with the print head, such as damage or overheating, it may cause the paper to not pass through properly. Therefore, it is necessary to regularly check the condition of the print head, replace or cool it in a timely manner to ensure its normal operation.

5、 Clean the interior of the printer

Dust and debris inside the printer are also one of the causes of paper jam problems. Especially in the paper path and drum section, dust and debris are prone to accumulate, which can affect the normal passage of paper. Therefore, it is recommended to regularly clean the interior of the printer, especially these critical areas, to reduce the risk of paper jams.

6、 Proper placement of paper

When placing paper in the paper tray, make sure it is neatly stacked and not piled up too much to avoid warping or folding. This can reduce the resistance of paper during transportation and lower the probability of paper jams.

7、 Restart the printer

Sometimes, a simple restart operation can solve some temporary problems, including paper jam issues. Turn off the printer, wait for a few seconds, and then restart it to allow the printer system to self detect and calibrate. Sometimes, this can solve the problem of paper jams.

8、 Check software settings

Check the software settings of the printer, such as paper type, size, and print quality, to ensure that these settings match the printing task. Inappropriate settings may cause paper jam problems.

If the paper jam problem is not resolved after the above steps, it is recommended to contact professional technical support or after-sales service personnel, who can provide more professional advice and solutions. At the same time, it is also possible to consider replacing the printer or upgrading the hardware configuration of the printer to accommodate higher quality paper and more complex printing tasks.