How to properly transport copperplate paper adhesive labels?

The handling of copperplate paper adhesive labels requires special care to avoid damaging the labels or affecting their effectiveness. Here are some correct methods of transportation:

Handle with care: Copperplate paper adhesive labels are relatively fragile, so they should be handled with care during transportation to avoid violent collisions or drops, in order to prevent label deformation, tearing, or glue loosening.

Use appropriate handling tools: Select appropriate handling tools based on the size and quantity of the labels, such as handling trucks, cardboard boxes, etc. Ensure that the tools are clean and tidy, and avoid contaminating the labels.

Keep dry: Copperplate paper adhesive labels are sensitive to humidity, and during transportation, the environment should be kept dry to prevent the labels from getting damp. If the environmental humidity is high, moisture-proof materials can be used to cover the labels to reduce the impact of moisture.

Avoid direct sunlight: Prolonged exposure to sunlight can cause label fading and adhesive aging. Therefore, during transportation, direct sunlight should be avoided and a cool and shady place can be chosen for handling and storage.

Neat stacking: During handling and storage, labels should be neatly stacked to avoid confusion and overlap. When stacking, it is necessary to ensure that the labels are evenly stressed to avoid deformation or damage caused by excessive local pressure.

Pay attention to the handling speed: When handling, maintain an appropriate speed to avoid being too fast or too slow. Too fast may cause collisions and falls, while too slow may increase the risk of labels getting damp or contaminated.

Strengthen packaging protection: For labels that require long-distance transportation or long-term storage, packaging protection should be strengthened. The moisture-proof and anti extrusion materials can be used for packaging, such as double-layer corrugated cardboard box, the thickness of the box wall is not less than 5mm, and the lining is filled with inflatable or foam materials.

In addition, the following points should be noted during the transportation process:

Check the quality of the labels: Before handling, the quality of the labels should be checked to ensure that they are intact, undamaged, and the adhesive is firm.

Follow the handling regulations: When handling, relevant handling regulations and safety operating procedures should be followed to ensure the safety and efficiency of the handling process.

Timely recording: Any problems or abnormal situations that occur during the handling process should be promptly recorded and notified to relevant personnel for handling.

In summary, proper handling of copperplate paper adhesive labels requires following certain methods and precautions. Only by ensuring safety, efficiency, and standardization during the handling process can the integrity and effectiveness of the labels be maximally protected.