How to remove copperplate adhesive labels attached to the surface of objects without leaving any traces?

【Is it difficult to remove residual adhesive marks on the tape? Teach you a trick to easily remove offset printing in just one minute - Bilibili】 https://b23.tv/BCXqTC3

To remove the copperplate adhesive labels attached to the surface of an object without leaving any traces, you can try the following methods:

1、 Physical methods

Metal needles or toothpicks paired with erasers

Use a slender metal needle or toothpick to gently insert from the edge of the adhesive label and then lift outward. Pay attention to applying force evenly to avoid damaging the surface of the object.

After removing the label, if there are any residual adhesive marks, you can gently wipe them off with an eraser.

Hair dryer heating

For adhesive labels on plastic products, you can use the hot air fan of a hair dryer to blow the label hot.

Maintain an appropriate distance to avoid overheating and damaging objects. When the label area is slightly hot, use nails or sharp tweezers to slowly lift it up from the edge of the label.

Hot air will reduce the stickiness of the adhesive, making it easier to peel off, but be careful when tearing to avoid leaving marks.

2、 Chemical methods

Hand cream, face cream or facial cleanser

These products contain surfactants and have good wetting, permeation, and dissolution abilities.

Apply an appropriate amount of hand cream or other ingredients to the label, let it sit for a moment, and then wipe it with a soft cloth or tissue to remove any adhesive marks.

Edible vinegar

Dip a cotton swab into a small amount of vinegar and apply it to the adhesive label.

After standing for a period of time, wipe with a cotton swab or tissue, and the adhesive will gradually peel off.

alcohol

Alcohol is an effective solvent for removing adhesive labels.

Apply alcohol to the adhesive label, let it sit for a moment, and then gently lift the label with your hand.

If there are any residual traces, you can use a tissue dipped in alcohol to wipe them off.

Wind oil essence

For stubborn stains left by adhesive labels, Fengyoujing has excellent cleaning effect.

Thoroughly soak the adhesive residue with wind oil essence, let it stand for a moment, and then wipe it off with a soft cloth or tissue to remove it. However, it should be noted that wind oil essence is corrosive to some plastics, and a small-scale test should be conducted in an inconspicuous location before use.

nail polish remover

Nail polish remover can effectively remove stains on materials such as stainless steel and glass, and is also suitable for removing adhesive labels.

Apply an appropriate amount of nail polish remover on the label, let it sit for a moment, and then gently scrape it off with nails or a soft cloth.

3、 Professional tools and methods

Tearing adhesive

Using specialized adhesive remover on the market can more conveniently remove adhesive marks.

According to the product instructions, use the adhesive remover. Usually, just apply it to the label and let it stand for a moment to easily peel off the label and any remaining traces.

Professional scraper or adhesive remover

For occasions where it is necessary to frequently remove adhesive labels, a professional scraper or adhesive remover can be purchased.

These tools are well-designed and can more thoroughly remove adhesive marks while avoiding damage to the surface of objects.

4、 Precautions

When removing adhesive labels, it is important to first understand the material and characteristics of the object's surface, and avoid using cleaning methods that may cause damage to it.

When using chemical solvents, attention should be paid to safety and avoid splashing into the eyes or skin. If accidentally splashed, immediately rinse with plenty of water and seek medical attention.

When removing adhesive marks, one should be patient and meticulous to avoid excessive force that may damage the surface of the object.

In summary, there are various methods to remove copperplate adhesive labels attached to the surface of objects without leaving any traces, and the appropriate method can be selected according to the actual situation for operation.