How to correctly install three proof thermal paper into the printer?

The steps for correctly installing tri proof thermal paper into a printer are usually similar to installing regular thermal paper, but may vary slightly depending on the printer model and brand.

Here is a general installation guide:

1、 Preparation work

Check the printer and thermal paper:

Ensure that the printer is turned off and the power is disconnected.

Check if the three proof thermal paper is intact and if the adhesive tape at the interface is easy to tear off.

Prepare tools:

Usually no special tools are needed, but make sure your hands are clean to avoid contaminating the paper.

2、 Installation steps

Open the printer paper compartment:

According to the printer model, gently pry open the cover or paper compartment cover of the printer and open it upwards.

Place thermal paper:

Tear off the adhesive tape at the interface of the three proof thermal paper and pull out a certain length of the paper.

Place the thermal paper flat into the paper compartment of the printer, ensuring that one end of the paper is correctly guided to the printing path.

Adjust paper position:

Adjust the paper guide or fixing device as needed to ensure that the paper is stable and in the correct position.

Close the paper bin:

Gently close the paper compartment cover or lid of the printer to ensure a secure closure.

3、 Inspection and testing

Check installation:

Turn on the printer power and check if the paper is fed correctly.

You can gently touch the paper with your fingers (under safe conditions) to feel if the paper moves smoothly.

Print test page:

Send a print task on the computer and print a test page.

Check the printing effect to ensure clear handwriting and no paper jams.

4、 Precautions

Avoid contamination: During installation, avoid touching the printing surface of the thermal paper directly with your hands to avoid leaving fingerprints or stains.

Proper placement: Ensure that the direction of the thermal paper is correct, usually with indicated arrows or markings on the paper.

Regular cleaning: Regularly clean the dust and paper scraps inside the printer to maintain print quality.

By following the above steps, you should be able to correctly install the three proof thermal paper into the printer and smoothly complete the printing task. If you encounter any problems during the installation process, it is recommended to refer to the printer's user manual or contact the printer manufacturer's customer support for assistance.